How should a multifunctional customized machine be maintained daily?

Mar 22,2025

Check if the X-axis and Y-axis cutting heads of the machine are working properly. If any problems occur, find the cause immediately.

How should a multifunctional customized machine be maintained daily?

Check if the X-axis and Y-axis cutting heads of the machine are functioning properly. If problems occur, find the cause promptly and contact our professional after-sales service personnel if necessary. 2. Check if the machine's tools are missing or loose, and promptly clean the garbage around the cutting head to ensure the cutter reaches the normal level. Regularly maintain the rotating parts of the cutting head, monitor wear parts in real-time, and replace them regularly. 3. Clean the X and Y axis guide rails and transmission gears/racks of the machine comprehensively every week, add lubricating oil in a timely manner, and keep the machine running smoothly. 4. Before operating the machine, start it according to the instructions and keep it running idle for 4-5 minutes. Do not place your hands near the running beam and cutting head during operation to avoid accidents. 5. The machine should not be placed in a place with strong sunlight to avoid direct sunlight, which may cause the table to crack and affect its service life. Do not place any objects on the table, as this will cause the machine platform to become uneven. Regularly wipe the table with alcohol to keep it clean. 6. Check for safety hazards and dust every workday, clean the dirt from the machine tool and guide rails, remove residual cutting material waste from the platform felt, and keep the machine clean. After work, turn off the air and power sources and promptly drain excess gas from the machine tool pipes. 7. Winter and summer are peak electricity consumption periods, which can easily lead to unstable voltage. In this case, a voltage regulator can be installed to prevent damage to internal electrical components caused by fluctuating voltage. 8. Set up warning signs, prohibiting non-professionals from operating the machine. If you need to leave the operating area for special reasons, cut off the power to prevent unauthorized operation by non-professionals. 9. Regularly optimize, scan for viruses, and maintain the computer. Instability in the computer system can also affect the normal operation of the cutting machine.

Keywords：

What are the differences between a vibrating knife cutter and an engraving machine?

How should I maintain a carving machine daily?

Related News

What are the differences between a vibrating knife cutter and an engraving machine?

Check if the X-axis and Y-axis cutting heads of the machine are working properly. If any problems occur, find the cause immediately.