News Center


Latest news about the digital cutting industry

Maintenance methods for vibration knife cutting machines

Mar 03,2025


1. Check if the cutting heads of the X-axis and Y-axis of the machine are working properly. If there are any problems, find the cause in time and contact our professional after-sales service personnel if necessary. 2. Check if there are any missing or loose tools on the machine, and clean the garbage around the tool head in time to ensure that the tool change position reaches the normal level. Regularly maintain the rotating parts of the tool head, monitor the wear parts in real time, and replace them regularly.
Maintenance methods for vibration knife cutting machines

  1. Check if the cutting heads of the machine's X-axis and Y-axis are functioning properly. If there are any problems, find the cause promptly and contact our professional after-sales service personnel if necessary.

  2. Check the tools for any missing or loose parts, and promptly clean up debris around the cutting head to ensure the cutter reaches the normal level. Regularly maintain the rotating parts of the cutting head, monitor wear parts in real time, and replace them periodically.

  3. Clean the machine thoroughly every week, including the X and Y axis guide rails and transmission gears and racks, and add lubricating oil promptly to maintain smooth machine operation.

  4. Before operating the machine, follow the instructions to power on and let it run idle for 4-5 minutes. Do not place hands near the moving beam and cutting head during operation to avoid accidents.

  5. Avoid placing the machine in direct sunlight to prevent the table from cracking and reducing its lifespan. Do not place any objects on the table, as this may cause the machine platform to become uneven. Regularly wipe the table with alcohol to keep it clean.

  6. Check for safety hazards and remove dust every workday, clean dirt from the machine tool and guide rails, remove cutting material residue from the felt in the platform to keep the machine clean, and turn off the air and power sources after work and promptly drain excess gas from the machine tool pipes.

  7. Winter and summer are peak electricity consumption periods, and voltage instability may occur. A voltage regulator can be installed to prevent damage to internal electrical components caused by voltage fluctuations.

  8. Set up warning signs to prevent unauthorized operation by non-professionals. If you need to leave the operating area for special reasons, cut off the power to prevent unauthorized operation by non-professionals.

  9. Regularly optimize, scan for viruses, and maintain the computer. Computer system instability can also affect the normal operation of the cutting machine.

Keywords:

Related News


What are the differences between a vibrating knife cutter and an engraving machine?

Check if the X-axis and Y-axis cutting heads of the machine are working properly. If any problems occur, find the cause immediately.

2025-03-22

How should a multifunctional customized machine be maintained daily?

Check if the X-axis and Y-axis cutting heads of the machine are working properly. If any problems occur, find the cause immediately.

2025-03-22

How should I maintain a carving machine daily?

Check if the X-axis and Y-axis cutting heads of the machine are working properly. If any problems occur, find the cause immediately.

2025-03-22